DIY Flamethrowers Forum

GENERAL DISCUSSION => Frequently Asked Questions => Topic started by: DIY Flamethrowers on August 22, 2020, 12:54:16 AM

Title: Should I wire the Switch Panel up to constant +12V?
Post by: DIY Flamethrowers on August 22, 2020, 12:54:16 AM
This is not suggested. The Switch Panel should be wired up to +12V accessory power. The RED wire from the Switch Panel is best spliced into a positive wire that only is hot when the vehicle is turned on to accessory or turned on. This is needed so that the vehicle owner doesn't accidentally turn on the Switch Panel when away from the vehicle.